| Please
review the information below. If you have any questions or need
further technical assistance, you are welcome to contact one of
our Mustang seat experts by clicking here or call
800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern
time. |
|
 |
Click
for
printer friendly
version |
|
A. Baseplate
Features
|
The two-piece,
marine-grade fiberglass baseplate is a direct replacement for the
stock seat. All brackets align with stock mounts for quick installation.
Rubber bumpers are positioned to protect the frame and fender.
For general
information about Mustang seat construction Click
Here.
|
|
B. Removal of
Stock Seat
|
|
1. Remove rear fender screw at back of passenger seat.
2. Pull rear seat back and up.
|
3. Remove passenger
handstrap.
|
|
4.
Remove screw at rear of solo seat.
5. Pull solo back and up. |
|
|
C. Mounting
of Mustang Seat
|
|
|
1. Center solo
on frame. |
2. Push down and
forward to engage the
solo's nose bracket into receiver under gas tank. |
|
3. Align solo's
rear bracket with the 6mm hole in
fender and install stock bolt. Tighten with an 8mm wrench.
|
Passenger Seat
|
1. Align the front bracket of passenger
seat with the U-bracket on fender. |
2. Lift rear of
seat slightly and slide forward until rear chrome bracket
aligns with the 6mm hole in fender. |
|
3. Install stock bolt and
tighten with an 8mm wrench. |
Enjoy the comfort of your new Mustang seat. |
|
All
text and graphics are COPYRIGHT © AL SIMMONS COMPANY, INC. ALL
RIGHTS RESERVED
No part of this web site may be reproduced, or transmitted in any form by
any means without PRIOR WRITTEN PERMISSION of Al Simmons Company, Inc.
Contact the Webmaster
